DTM Series connectors are the answer to all of your smaller wire gauge applications. Building on the DT design strengths, the DTM connector line was developed to fill the need for lower amperage, multi- pin, inexpensive connectors. The DTM Series offers the designer the ability to use multiple size 20 contacts, each with 7.5 amp continuous capacity, within a single shell.
Specifications - Integral connector latch
- Rugged thermoplastic housing
- Operating at temperatures from -55°C to +125°C continuous at rated current
- Insulation resistance: 1000 megohms minimum at 25°C
- -55°C to +125°C operating temperature
- Available in 2, 3, 4, 6, 8 & 12 sizes
- Silicone seals
- Accepts AWG 16 through 20 wire (1.0mm2to 0.5mm2)
- Crimp contacts with option of gold or nickel, solid or stamped
- Current rating: 7.5 Amps all contacts @ 125°C
- Hand insertable/removable contacts
- 1500V, 20G @ 10 to 2000 Hz
- Dialectric withstand
- Dielectric withstanding voltage: current leakage less than 2ma at 1500 VAC
- International Motorsport Approved
|