double row 5 pin pogo pin connector
Housing: PPA, PA46, PA9T, LCP
Pogo Pin OEM
PACK:
Bulk: aluminum foil bag.
Reel: diameter Φ330mm; carrier tape width: 12, 16, 24, 32, 44mm.
=================================================================================
product testing introduction | Electrical performance | | 1 | Contact impedance | 30 mohm Max at working stroke | Top-Link factory testing standard* | | 2 | Insulation Resistance | 500 Mohm Min | EIA-364-21 | | 3 | Dielectric Withstanding Voltage | No flash-over,air discharge,breakdown or leakage | EIA-364-20 | | 4 | Temperature Rise vs Current Rating | 30 °C Max.
temperature rise at specified current | EIA-364-70 | | Mechanical performance | | 1 | Spring force | refer to product drawing | EIA-364-04 | | 2 | Retention Force | 0.5Kgf(4.5N)Min. | EIA-364-29 | | 3 | Durability | 10,000 cycles Min.
No physical damage Resistance after test 30 mohm Max. | EIA-364-09 | | 4 | Vibration | No physical damage,No electrical discontinuity more than 1i second. | EIA-364-28 | | 5 | Mechanical Shock | No physical damage,No electrical discontinuity more than 1i second. | EIA-364-27 method A | | Environmental | | 1 | Solderability | solder coverage area Min.95% | EIA-364-52 | | 2 | Salt Spray Corrosion | No physical damage. Resistance after test 100 mohm Max. | EIA-364-26 condition B | | 3 | Resistance to Solder heat(IR/convection) | No cracks,chips,melting,orblister | EIA-364-56 | | 4 | Humidity | No physical damage, Resistance after test 100 mohm Max. | EIA-364-31,method ii,condition A | | 5 | Thermal Shock | No physical damage, Resistance after test 100 mohm Max. | EIA-364-32,method ii | | 6 | Temperature Life | No physical damage, Resistance after test 100 mohm Max. | EIA-364-17,condition A,condition 4 | | Environmental | | 1 | peel force | 10-130 gf | EIA-481 | | 2 | Drop Test | | Refer to drop test Standard of Molex | - Remark:Considering the difference between test spot and actual work spot, the impedance test condition defined by Top-Link is based on the whole working stroke. This is what we generally said dynamic impedance testing, it differs from the static test condition of ELA-364923, the durability test standard is also based on this test condition.
- -----------------------------------------------------------------------------------------------------------------------------------------------------------
- KLS is equipped with comprehensive inspection and reliability testing equipment.
- KLS attaches great importance to quality management of each link, including IQC, IPQC, 100% dynamic testing of spring force and contact impedance , 100% appearance inspection, FQC sampling inspection, CQC, design verification, regular reliability testing, failure analysis, and so on.
- KLS has implemented strict and effective quality control over each link which includes product design, sample preparation, trial production and mass production. As a consequence, our product quality is guaranteed.
- ==========================================================================================
- pogo pin connector OEM type
1, small diameter, fine type products The minimum can be done is below 0.75 2, high durability Maximum durability of up to 1 million times 3, large current Maximum up to 15A current 4, high reliability 100% dynamic impedance testing to ensure 100% functional zero defects 5, lower operating height Minimum working height of up to 1.5mm, the chopping block can be lower 6, high precision (size & forward force) Height tolerances up to +, - 0.05mm positive up to + / - 10% 7, non-standard structure Customer requirements can be customized according to customer requirements, such as: mushroom head structure |